This port accepts AVTECH's 5V power adapter (shown above) to power the Room Alert 3S by main power. There are models for each and every country.

Room Alert 3S is PoE-enabled, so you may power it over PoE instead if you wish.

This RJ-45 port connects your Room Alert 3S to your network via an RJ-45 Ethernet cable (shown above).

This port is PoE-enabled, so you may power your Room Alert 3S by connecting it to your PoE-enabled switch.

This ports accepts a switch sensor or dry contacts on a device such as a UPS. AVTECH offers switch sensors for every critical environment factor, such as power, flood (shown above), smoke, air flow and more.

This RJ-11 port accepts an AVTECH digital sensor or a Light Tower & Relay Adapter.

Our digital sensors include:

• Digital Temperature (above)
• Digital Outdoor Temperature
• Digital Fluid Temperature
• Digital Temperature & Humidity
• Digital Extreme Temperature
• Digital Temperature & Analog
• Digital Active Power

Through the Light Tower & Relay Adapter, you can connect a Light Tower or Relay Switch to your Room Alert 3S. The Light Tower provides visual and audible alerting, while the Relay Switch can turn on and off up to 4 low-voltage electrical devices.

This button resets Room Alert to defaults. It clears out all of your custom entries, such as your password and static IP address.

This port accepts AVTECH's 5V power adapter (shown above) to power the Room Alert 12S by main power. There are models for each and every country.

Room Alert 12S is PoE-enabled, so you may power it over PoE instead if you wish.

This RJ-45 port connects your Room Alert 12S to your network via an RJ-45 Ethernet cable (shown above).

This port is PoE-enabled, so you may power your Room Alert 12S by connecting it to your PoE-enabled switch.

This set of standard RJ-11 ports accepts up to 3 of AVTECH's digital sensors.

Our digital sensors include:

• Digital Temperature (above)
• Digital Outdoor Temperature
• Digital Fluid Temperature
• Digital Temperature & Humidity
• Digital Temperature & Analog
• Digital Active Power
• Digital Extreme Temperature

This button resets Room Alert to defaults. It clears out all of your custom entries, such as your password and static IP address.

This port accepts a connection to AVTECH's Light Tower & Relay Adapter, through which you can connect a Light Tower (pictured above) or Relay Switch to your Room Alert 12S.

The Light Tower provides visual and audible alerting, while the Relay Switch can turn on and off up to 4 low-voltage electrical devices.

This port accepts an analog sensor, such as AVTECH's Current Loop 1 or 2 (shown above) or an Extreme Temperature Sensor.

This set of ports accepts up to 2 low-voltage electrical devices, such as a fan or an air conditioner, so that your Room Alert 12S can turn them on and off in response to alarm conditions.

This set of ports accepts up to 4 switch sensors or dry contacts on a device such as a UPS. AVTECH offers switch sensors for every critical environment factor, such as power, flood (shown above), smoke, air flow and more.

The Power Status LED indicates whether your Room Alert 32 is running on main power/PoE (solid green) or the internal battery backup (solid red).

This RJ-45 port connects your Room Alert 32 to your network via an RJ-45 Ethernet cable (shown above).

This port is PoE-enabled, so you may power your Room Alert 32 by connecting it to your PoE-enabled switch.

This set of standard RJ-11 ports accepts up to 8 of AVTECH's digital sensors.

Our digital sensors include:

• Digital Temperature (above)
• Digital Outdoor Temperature
• Digital Fluid Temperature
• Digital Temperature & Humidity
• Digital Temperature & Analog
• Digital Active Power
• Digital Extreme Temperature

These LEDs indicate the alarm or clear status of your Digital, Switch or Custom (possible future use) sensors:

Green = Clear

Red = Alarm

This set of ports accepts up to 2 Light Tower & Relay Adapters (LTAs), through which you can connect a Light Tower (shown above) and Relay Switch to your Room Alert 32.

The Light Tower provides visual and audible alerting, while the Relay Switch can turn on and off up to 4 low-voltage electrical devices.

This set of ports accepts up to 2 low-voltage electrical devices, such as a fan or an air conditioner, so that your Room Alert 32 can turn them on and off in response to alarm conditions.

These ports accept up to 2 analog sensors, such as AVTECH's Current Loop 1 or 2 (shown above) or Extreme Temperature Sensors.

This set of ports accepts up to 8 switch sensors or dry contacts on a device such as a UPS. AVTECH offers switch sensors for every critical environment factor, such as power, flood (shown above), smoke, air flow and more.

This button resets Room Alert to defaults. It clears out all of your custom entries, such as your password and static IP address.

In the On position, this button engages the Room Alert 32's built-in battery backup.

The battery backup is made up of 3 AAA Ni-MH batteries (shown above) and can power the Room Alert for up to 15 minutes if main power fails.

This port accepts AVTECH's 5V power adapter (shown above) to power the Room Alert 32 by main power. There are models for each and every country.

Room Alert 32 is PoE-enabled, so you may power it over PoE instead if you wish.